A larger 6015 body with five tines, for machines working through bigger timber and heavier bundles.
The 6015 is the heavier of the two standard bodies. On the same tine count it carries more steel in the body and pivots, which is what you need when the load is a full-length trunk rather than a bundle of branches.
At a glance
| Item | Specification |
|---|---|
| Model | Log Grapple 6015 |
| Tine / jaw layout | See drawing for the arrangement on your order |
| Head type | Fixed or rotating – confirmed at order |
| Hydraulic supply | One auxiliary circuit (rotating head) |
| Mounting | Headstock machined to your pin diameter and centre distance |
| Carrier class | Matched to your machine – tonnage and lift chart confirmed before release |
| Finish | Two-pack paint, colour to order |
Dimensions, opening and working load are confirmed against your drawing before production. Nothing on this page is a substitute for that confirmation.
What it is used for
- Handling full-length saw logs
- Loading timber trailers and trucks
- Site clearance with heavy trunks
- Stockpiling logs at a yard or mill landing
How it is built
- Heavier body plate than the 6013 range
- Five tines with reinforced roots at the body
- Oversized pivot pins and bushings
- Cylinder sized for the heavier body
- Headstock to your pin pattern
What to send with your inquiry
- Excavator make and model, and the lift chart if you have it
- Coupler type – S30, S40, S45, S80 – or the pin diameter and centre distance
- Auxiliary hydraulic flow and pressure (litres per minute and bar)
- What you will handle: log diameter and length, or material type for a clamshell
- Any opening or width the job requires
- Photos of the machine and the coupler help more than a written description
Ordering notes
Each unit is built to the headstock and hydraulic specification confirmed on the drawing. Confirm the drawing before production starts – after the body is cut and the headstock is machined, changes to the pin pattern mean a new headstock, not an adjustment. Spare bushings and pins can be supplied with the unit so the first rebuild does not wait on parts.
Questions we are usually asked
Which body suits my machine?
The right body depends on the machine class and on what you lift, not on tonnage alone. Give us the machine model, the heaviest log you expect to handle and the coupler type, and we match the body.
Can the tines be replaced?
Tines are welded into the body on the standard build. If you expect tip wear, ask about a replaceable-tine version when you inquire and we quote it as an option.
Is a fixed head available on the 6015?
Yes. Fixed and rotating heads are both available; the rotating version needs one auxiliary circuit.