The largest body in the family, for heavy trunks and continuous yard work on larger carriers.
The 6112 is built for the duty cycle rather than the single pick: yard work, mill landings and long shifts handling full-length timber. The body and pivots carry more steel, which is what survives repeated loading rather than what looks strongest on the day of delivery.
At a glance
| Item | Specification |
|---|---|
| Model | Log Grapple 6112 |
| Tine / jaw layout | See drawing for the arrangement on your order |
| Head type | Fixed or rotating – confirmed at order |
| Hydraulic supply | One auxiliary circuit (rotating head) |
| Mounting | Headstock machined to your pin diameter and centre distance |
| Carrier class | Matched to your machine – tonnage and lift chart confirmed before release |
| Finish | Two-pack paint, colour to order |
Dimensions, opening and working load are confirmed against your drawing before production. Nothing on this page is a substitute for that confirmation.
What it is used for
- Yard and mill landing work
- Heavy trunk handling on larger carriers
- Continuous loading of timber trucks
- Log sorting by length or diameter
How it is built
- Heaviest body in the range
- Reinforced pivot bosses
- Oversized cylinder with rod protection
- Replaceable bushings at all pivots
- Rotating head available
What to send with your inquiry
- Excavator make and model, and the lift chart if you have it
- Coupler type – S30, S40, S45, S80 – or the pin diameter and centre distance
- Auxiliary hydraulic flow and pressure (litres per minute and bar)
- What you will handle: log diameter and length, or material type for a clamshell
- Any opening or width the job requires
- Photos of the machine and the coupler help more than a written description
Ordering notes
Each unit is built to the headstock and hydraulic specification confirmed on the drawing. Confirm the drawing before production starts – after the body is cut and the headstock is machined, changes to the pin pattern mean a new headstock, not an adjustment. Spare bushings and pins can be supplied with the unit so the first rebuild does not wait on parts.
Questions we are usually asked
What machine class does the 6112 need?
It is the heaviest body in the family and needs a machine that can carry it at reach with a load. Send the machine model and the lift chart and we confirm before quoting.
Can it be repaired on site?
Pins and bushings are replaceable. Structural repair should be done by a coded welder; we supply the drawings needed for that.
Is it available with a fixed head?
Both head types are available. Rotation needs one auxiliary circuit.